EPA UCMR 5 DataHigh Detection Rate

PFAS Contamination in New Hampshire

Per- and polyfluoroalkyl substances (PFAS) detected in New Hampshire drinking water systems. Data from EPA UCMR 5 monitoring covering 248 public water systems.

Systems Tested

248

Detection Rate

81.5%

Exceeding MCL

68

Max Level

185 ppt

PFAS Overview: New Hampshire

Detection Rate

81.5%

of systems tested

vs National Average

+47.1%

National avg: 34.4%

PFAS Detections

202

systems with any PFAS

Exceed EPA MCL (4 ppt)

68 (27.4%)

of tested systems

State notes: EWG: 202 systems above proposed limits (4th highest nationally). Pease AFB (PFAS from firefighting foam) and Saint-Gobain Merrimack plant are major sources. State has own MCLs

EPA PFAS Standards (2024)

In April 2024, the EPA finalized Maximum Contaminant Levels (MCLs) for six PFAS compounds. Water systems must comply by 2029.

CompoundMCL
PFOA4 ppt
PFOS4 ppt
PFNA10 ppt
PFHxS10 ppt
HFPO DA_GenX10 ppt

Source: EPA Final PFAS NPDWR, April 2024. Compliance required by 2029.

Health Effects of PFAS Exposure

Cancer Risk

PFOA and PFOS are associated with kidney, testicular, and other cancers

Thyroid Disruption

PFAS can interfere with thyroid hormone function

Immune Effects

Reduced vaccine response and immune system impairment in children

Reproductive Harm

Linked to pregnancy complications and reduced fertility

Liver Damage

Elevated liver enzymes and liver disease risk

Developmental Effects

Harm to fetal development and child growth

Frequently Asked Questions

Does New Hampshire have PFAS in the water?

Yes. New Hampshire has a 81.5% PFAS detection rate across 248 tested public water systems, according to EPA UCMR 5 data. This means 202 systems detected at least one PFAS compound. The national average detection rate is 34.4%, so New Hampshire is 47.1 percentage points above average.

How bad is PFAS contamination in New Hampshire?

New Hampshire's PFAS contamination is rated high severity. The maximum recorded PFAS level is 185 ppt, compared to the EPA MCL of 4 ppt for PFOA and PFOS. 68 systems exceed the EPA MCL, representing 27.4% of tested systems. EWG: 202 systems above proposed limits (4th highest nationally). Pease AFB (PFAS from firefighting foam) and Saint-Gobain Merrimack plant are major sources. State has own MCLs

What can I do to reduce PFAS exposure in New Hampshire?

The most effective options are reverse osmosis (RO) filtration systems, which remove up to 90-95% of PFAS, and granular activated carbon (GAC) filters certified under NSF/ANSI Standard 58 or 62. Standard pitcher filters provide limited protection. Contact your water utility to request PFAS test results, or check the EPA's UCMR 5 data portal for your system's specific readings.

What is the EPA MCL for PFAS?

The EPA finalized Maximum Contaminant Levels (MCLs) for PFAS in April 2024: 4 parts per trillion (ppt) each for PFOA and PFOS, and 10 ppt each for PFNA, PFHxS, and HFPO-DA (GenX). Water systems have until 2029 to comply. These are the strictest PFAS drinking water standards in the world.

National Comparison

New Hampshire Detection Rate81.5%
National Average34.4%
Systems Tested248
Exceeding MCL68
Max PFAS Level185 ppt

Reduce PFAS Exposure

  • +Use a reverse osmosis filter (most effective)
  • +Look for NSF/ANSI 58 or 62 certified systems
  • +Granular activated carbon (GAC) filters reduce PFAS
  • +Standard pitcher filters offer limited protection
  • +Request PFAS test results from your utility